Drills Tools
| Hardware > Tools > Drills > > Milwaukee The Milwaukee 0370-20 is a 3/8-inch Close Quarter Angle Drill. It provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters. Features: Metal framed gear train for longer gear life Large paddle trigger for smooth control and easy grip in any position Angled chuck for reaching close quarters other drills cannot reach Textured palm grip reduces slipping Angled cord exit keeps the cord out of the work area Chuck shield prevents marring of surfaces The convenient forward/reverse lever is easy to use in close quarters What's In the Box: 0370 3/8" Close Quarter Angle Drill 3/8" Chuck Key Rubber Flex Key Holder 0370-20 |
| Hardware > Tools > Drills > > Bosch The Bosch Factory Reconditioned PS40-2A is a 12-Volt Max Litheon Impact Driver With 2 Batteries. This driver is 50% Lighter than 18-Volt Impact Driver at 2.2 only lbs. The Bosch PS40-2A features 3 LED lights to illuminate the work area for use in dark areas. The PS40-2A also has 60% more torque than 18-Volt drill/drivers. At 800 in.-lbs of max torque this small impact driver is very efficient. Features: Powerful Hammer and Anvil System [feature] Produces 800 in/lbs of torque [benefit] High Performance Motor and All Metal Gears [features] Deliver 1,800 RPM and 3,000 BPM for fast fastening Compact and Lightweight [feature] Only 6/12 in length, just 2.2 lbs Hex Quick Change Chuck [feature] Instantly change from drill bits to driving bits What's In The Box: Bosch PS40-2A Factory Reconditioned 12.V Impact Driver PS402A |
| Hardware > Tools > Drills > > Bosch The Bosch 17618-01 has a high torque mode which produces over 650 in.-lbs.The High speed mode produces 2,050 RPM, up to 30,750 BPM, and Durashield Housing & unibody powertrain provide optimum reinforcement to withstand real world conditions. Bosch Litheon Batteries feature State-of-the-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions and are designed for maximum cyclelife, minimum self-discharge and not memory. The Brute Though Hammer Driver Drill features effect1/2" Metal Chuck for increased durability and high Strength Metal Collar enhances tool durability and protection when dropped on the chuck. The 17618-01 is newly Designed Powertrain and Gears increase tool life and durabilityLED Light is great for dark or enclosed areas. This Bosch Driver Drill has an ergonomic two-tone soft grip handle for extended comfort and control. Features: High torque mode produces over 650 in.-lbs. High speed mode produces 2,050 RPM, up to 30,750 BPM Durashield Housing & unibody powertrain provide optimum reinforcement to withstand real world conditions Bosch Litheon Batteries - State-of-the-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions Bosch Litheon Batteries - Designed for maximum cyclelife, minimum self-discharge and not memory effect 1/2" Metal Chuck for increased durability High Strength Metal Collar enhances tool durability and protection when dropped on the chuck Newly Designed Powertrain and Gears increase tool life and durability LED Light is great for dark or enclosed areas Ergonomic two-tone soft grip handle - For extended comfort and control 25 Position Clutch Variable speed trigger for complete control What's In the Box: 17618-01 18V Drill/Driver (2) 18V Litheon FatPack Batteries 30-Minute Litheon Battery Charger Magnetic Bit Holder Philips Drive Bit Auxiliary Handle Carrying Case 1761801 |
| Hardware > Tools > Drills > > Dewalt The DeWalt DC720IA 18-Volt Drill Driver and Impact Driver Combo Kit includes a DeWalt DC720 1/2-Inch Driver Drill and a DW056 Impact Driver. The compact NiCad batteries of the DC720IA Combo Kit make for a lighter, more compact tool that can be more easily manuevered in tight spaces. The DC720IA Drill and Impact Driver Kit is ideal for any drilling, driving or fastening application. Features: The high performance frameless motor of the DC720 Driver Drill delivers maximum power of 410 unit watts out with dual speed settings (0-500/0-1,700 RPM) for optimal performance 1/2-inch single-sleeve, ratcheting chuck reduces bit slippage With 1,170 inch-pounds of maximum torque, 0-2,400 RPM and 0-3,000 BPM, the DW056 Impact Driver has the power to drive large lag screws into pressure treated lumber Lightweight, compact design allows access into tight spaces What's In The Box: DeWalt DC720 1/2-Inch Driver Drill DeWalt DW056 Impact Driver Two Compact 18-Volt NiCad Batteries Charger Contractor Bag DC720IA |
| Hardware > Tools > Drills > > Delta The Delta 15-126 15-Inch RAM Radial Drill Press provides the versatility of a power tool with the capacity and performance of a machine tool. The Delta 15-126 15-Inch RAM Radial Drill Press features a 1/2 HP single-phase motor and has a range of 16 different speeds that vary from 175 RPM up to 8200 RPM. The large 26 x 18-inch table on the Delta 15-126 is made of cast iron and provides four T-Slots and an oil trough that can handle a half-inch pipe. With a tilting head, a 42-inch column and a six inch quill stroke the Delta 15-126 has everything that you would need in a drill press. Features: Smartly designed with convenient controls such as an adjustable quill return spring and quill lock knob 42-inch column allows the press to offer extra spindle nose to table capacity Head tilts 45-degrees left or right and has an easy-to-read scale What's In The Box: Delta 15-126 15-Inch RAM Radial Drill Press No. 2 MT spindle 15126 |
| Hardware > Tools > Drills > > Senco The Tyrex DCF5000 Auto-Feed Drywall Screw Gun makes easy work of tough jobs. Professional remodelers, contractors and do it yourselfers will appreciate the convenience of the 3,300 rpm collated screw system, which increases productivity by eliminating the need for handling loose screws. Features: Built in belt hook ,comfort grip, adjustable depth of drive for flush drive or countersink Corded power for the demanding need of professional remodelers and contractors Trigger lock with reverse for continuous work Drives 1-inch to 2-inch screws What's In The Box: Tyrex DCF5000 Auto-Feed Drywall Screw Gun Two Spare Drive Bits Drywall Nose Piece Wood Nose Piece Carrying Case DCF5000 |
| Hardware > Tools > Drills > > Delta The Delta DP350 12-Inch ShopMaster Variable-Speed Bench Drill Press gives you plenty of drilling options with variable speeds from 500 to 3,100 RPM. The DP350 features a table that tilts up to 90 degrees, allowing for angular drilling applications. The side ledges and slots on this Drill Press let you clamp your material quickly and securely for better performance and less headaches. Features: Adjustable-position locking depth stop for accurate depth measurement and repetitive drilling Variable speeds for drilling a wide variety of woods, plastics, and metals Flexible lamp provides extra light to the work surface Three-spoke pilot wheel for operator convenience with 3-1/4-inch quill stroke Induction-type motor for long lasting, smooth performance Pivoting motor mount maintains correct belt tension and facilitates speed changes Rack-and-pinion mechanism makes it easy to raise or lower table 0- to 1/2-inch capacity, 3-jaw positive grip chuck for positive gripping of various drill press cutting tools What's In The Box: Delta DP350 12-Inch ShopMaster Variable-Speed Bench Drill Press DP350 |
| Hardware > Tools > Drills > > Performance The Performance W1352 45-Piece Power Bit Set includes a wide variety of extra strong and durable chrome vanadium bits and drivers in a convenient molded storage case. Features: 27 assorted chrome vanadium bits - Slotted, Phillips, Hex, Star, Hi-Torgue and Robertson 1/4-inch hex adapter seven chrome vanadium 6-point nut drivers Magnetic hex extension Five drill bits Three bit holders Blow molded storage case What's In The Box: Performance W1352 45-Piece Power Bit Set W1352 |
| Hardware > Tools > Drills > > Dewalt DeWalt DW124K 1/2-inch Stud & Joist Right Angle Drill Kit is designed for plumbers and electricians to drill larger holes safer and faster. It drills up to 2-9/16” holes at 1200 RPM or larger holes up to 4-5/8” at 300 RPM. The DeWalt DW124K has mechanical clutch in the 300 RPM setting will engage at 70 ft-lbs of torque, preventing kickback. The extra length of the joist and stud drill provides more leverage, while its compact head will fit with accessories between standard studs. Features: 100 percent ball-bearing construction provides durability and longer tool life Mechanical-slip clutch in low gear to prevent bit lock-up and to provide control of reactionary torque Adjustable front handle and 2-position side handle provide maximum leverage and control Mechanically controlled 2-speed to match rpm/torque to application requirement Triple gear reduction provides increased torque and reduces gear stress 21-inch overall length provides greater control and leverage What's In The Box: DeWalt DW124K 1/2-inch Stud & Joist Right Angle Drill Kit Chuck Key With Holder 2-Position Side Handle Heavy-Duty Kit Box Bail Handle DW124K |
| Hardware > Tools > Drills > > Milwaukee The Milwaukee 4262-1 is a 3/4-Inch, 11.5 Amp Electromagnetic Drill Press Motor. Features: 11.5 amps, 350 RPM, 3/4-Inch capacity Geared low for maximum torque Develops up to 1670 pounds of drill point pressure with a 1-Inch steel plate Dual mount gear case/reverse mount for tight quarter drilling Taps up to 1-14 threaded hole Motor is best used on 4203 adjustable base What's In The Box: Milwaukee 4262-1 3/4-Inch Electromagnetic Drill Press Motor 4262-1 |
| Hardware > Tools > Drills > > Milwaukee Milwaukee 49-56-0223 4-1/4" Ice Hardened Hole Saw 49-56-0213 |
| Hardware > Tools > Drills > > Bosch The Bosch RC2144 is a 7/8-Inch x 12-Inch SDS-Plus Rebar Cutter designed for drilling into rebar embedded concrete using SDS-Plus Rotary Hammers. RC2144 |
| Hardware > Tools > Drills > > Bosch The Bosch RC2124 is a 3/4-Inch x 12-Inch SDS-Plus Rebar Cutter designed for drilling into rebar embedded concrete using SDS-Plus Rotary Hammers. RC2124 |
| Hardware > Tools > Drills > > Bosch The Bosch 37618-01 has a high torque mode which produces over 650 in.-lbs. The high speed mode produces 1,800 RPMDurashield™. Housing & unibody powertrain of the Brute Tough Drill Driver provide optimum reinforcement to withstand real world conditions. The Bosch Litheon™ Batteries are state-of-art Lithium-ion battery technology coupled with Bosch's proprietary. The ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions. Bosch Litheon™ Batteries are designed for maximum cyclelife, minimum self-discharge and no memory. The 37618-01 effect 1/2" Metal Chuck for increased durability. The High Strength Metal Collar enhances tool durability and protection when dropped on the chuck. Features: High torque mode produces over 650 in.-lbs. High speed mode produces 1,800 RPM Durashield™ Housing & unibody powertrain provide optimum reinforcement to withstand real world conditions Bosch Litheon™ Batteries - State-of-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions. Bosch Litheon™ Batteries - Designed for maximum cyclelife, minimum self-discharge and no memory effect 1/2" Metal Chuck for increased durability High Strength Metal Collar enhances tool durability and protection when dropped on the chuck Newly Designed Powertrain and Gears increases tool life and durability LED Light is great for dark or enclosed areas Ergonomic two-tone soft grip handle - For extended comfort and control 25 Position Clutch Variable speed trigger for complete control What's In the Box: 37618-01 18V Drill/Driver (2) 18V Litheon™ FatPack Batteries 30-minute Litheon™ Battery Charger Magnetic Bit Holder Philips Drive Bit Auxiliary Handle Carrying Case 37618-01 |
| Hardware > Tools > Drills > > Bosch The Bosch 17614-01 is a Hammer Driver Drill. Features: High torque mode produces over 600 in.-lbs. High speed mode produces 1,700 RPM, up to 25,500 BPM Durashield Housing & unibody powertrain provide optimum reinforcement to withstand real world conditions Bosch Litheon Batteries - State-of-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions Bosch Litheon Batteries - Designed for maximum cyclelife, minimum self-discharge and not memory effect 1/2" Metal Chuck for increased durability High Strength Metal Collar enhances tool durability and protection when dropped on the chuck Newly Designed Powertrain and Gears increase tool life and durability LED Light is great for dark or enclosed areas Ergonomic two-tone soft grip handle - For extended comfort and control 25 Position Clutch Variable speed trigger for complete control What's In the Box: Bosch 17614-01 Hammer Driver Drill 2- 14.4V Litheon™ FatPack Batteries - BAT614 1- 30-minute Litheon™ Battery Charger - BC630 1- Magnetic Bit Holder 1- Philips Drive Bit 1- Auxiliary Handle 1- Carrying Case 17614-01 |
| Hardware > Tools > Drills > > Dewalt The DeWalt DW272 Factory Reconditioned Heavy-Duty VSR Drywall Screwdriver features a powerful 6.3 Amp motor and weighs in at a light 3.1 pounds. The DW272 is engineered to excel in the most demanding applications. Features: Metal gear housing for jobsite durability and external clutches for extended tool life Depth-sensitive, "set and forget" nosepieve ensures consistent fastener depth Rubber grip and two-finger trigger for increased comfort and greater control Helical-cut, heat-treated steel gears for long life and durability Lightweight with excellent ergonomics What's In The Box: DeWalt DW272R Heavy-Duty VSR Drywall Screwdriver DW272R |
| Hardware > Tools > Drills > > Bosch The Bosch 5412 12-inch Dual-Bevel Sliding Miter Saw offers up-front bevel and miter controls. The up-front controls on the 5412 give you ultimate control and versatility — making it easy for you to make changes on the fly. This Bosch Miter Saw gives increases control further with a multi-position comfort handle. Features: Upfront Bevel Lock Lever and Range Selector Knob provides easily-accessed controls for quick and accurate bevel settings Multi-Position Main Handle easily locks into any of four positions for optimum comfort and control Large 25-1/2-inch Base with Built-In Cast Sliding Extensions for 40-inch total length Tall 4-1/2- inch Speed-Track Sliding Fences for easy bevel set-ups and increased crown molding cutting capacities Built-in Length Stop for repetitive cuts of the same length Easily Readable Bevel and Miter Scales for easy setting of accurate bevel and miter angles What's In the Box: Bosch 5412 12-inch Dual-Bevel Sliding Miter Saw Premium 60-Tooth Thin-Kerf Carbide-Tipped Blade - CB1260 Wrench Set Tool-Free Vertical Work Clamp - MS1226 Dust Bag - MS1225 5412 |
| Hardware > Tools > Drills > > Bosch The Bosch RC2172 is a 1-1/4 Inch x 12-Inch SDS-Plus Rebar Cutter designed for drilling into rebar embedded concrete using SDS-Plus Rotary Hammers. RC2172 |
| Hardware > Tools > Drills > > Bosch The Bosch RC2168 is a 1-1/8 Inch x 12-Inch SDS-Plus Rebar Cutter designed for drilling into rebar embedded concrete using SDS-Plus Rotary Hammers. RC2168 |
| Hardware > Tools > Drills > > Milwaukee The Milwaukee 48-89-9050 is a 2-Piece Step Drill Bit Set. Features: Step drill bit set allows you to quickly and easily drill a variety of round holes in steel, brass, copper, aluminum, wood, Plexiglas and plastic Self-starting multi-hole and hole-enlarging bits Made from high alloy, industrial grade steel for increased durability Set provides a diameter range from 1/8 to 1 inch What's In the Box: Milwaukee 48-89-9050 2-Piece Step Drill Bit Set 48-89-9050 |
| Hardware > Tools > Drills > > Bosch Easy to actuate paddle-type switch Low profile design for drilling in close quarters Variable speed dial for matching speed to the application. Features Easy to actuate paddle-type switch Low profile design for drilling in close quarters Variable speed dial for matching speed to the application Whats In The Box 3/8 inch Right Angle Drill 1132VSRR |
| Hardware > Tools > Drills > > Bosch The Bosch 11247 is a Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer. The tough new spline drive combination hammer offers dual mode operation for hammering with or without rotation. The Bosch 11247 features a 10 Amp motor that provides 400 RPM and 3000 BPM and delivers 5.2 ft-lbs of energy with each impact. This Spline Drive Rotary Hammer has an integrated clutch to help minimize torque reaction and Vario-Lock positioning that rotates and locks chisels into 12 different positions to optimize the working angle. The rotary hammer is 17-1/4 inches in length, weighs 13.6 lbs and has a maximum bit size of 1-9/16 inches. Features: Spline/round hex bit system tool-free bit changes, with automatic bit locking "Combination" dual mode selector 2 modes of operation, rotary hammer and hammer only mode Vario-Lock positioning rotates and locks chisel into 12 different positions to optimize working angle Innovative service modules designed so a qualified service technician can quickly replace the brushes and cord 360° Auxiliary handle provides a wide range of movement along with operator comfort Integral clutch helps minimize torque reaction What's In the Box: Bosch 11247 Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer 11247R |
| Hardware > Tools > Drills > > Dewalt The DeWalt DC920KA Factory Reconditioned 1/2-Inch 18-Volt Cordless Drill/Driver Kit is ideally suited for drilling, driving or fastening. With its ergonomic design, the DeWalt DC920KA feels balanced in your hand and is sure to cause less fatigue. Features: Three speed transmisson optimizes the performance by letting the drill easily change speeds depending on the requirements of the application Durable, high-efficiency motor provides maximum power of 510 unit watts out for fast, effective fastening and drilling 1/2-inch self-tightening axial locking chuck prevents bit slippage for improved precision Ergonomic design provides a comfortable grip and optimal balance, size, and weight What's In The Box: DeWalt DC920KAR Factory Reconditioned 1/2-Inch 18-Volt Cordless Drill/Driver Two 18-Volt Battery Packs 360-Degree Side Handle One-Hour Charger Heavy-Duty Kit Box DC920KAR |
| Hardware > Tools > Drills > > Flex The Flex BED55 is a core drilling unit for confined areas. The slim, stable drill stand, lateral supports and long feed column are characteristic of the drilling unit, enabling drilling of the next higher step from a lower one. Swiveling the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (1/2” to 3”) thanks to mechanical 3-speed gearing and VR full-wave electronic control. The Flex BED55 features GFCI operator protection circuit breaker for electrical safety during wet grinding. The Wet Core Drill cuts out extremely fast with the required response sensitivity (less than 15 milliseconds). The Flex BED55 Core Drill has reactuation protection at power interruption. Features: Swiveling the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Speed can be adapted to any bit diameter (1/2” to 3”). Reactuation protection at power interruption. What's In the Box: Flex BED55 Wet Core Drill & Stand BED55 |
| Hardware > Tools > Drills > > Milwaukee Milwaukee 49-56-0167 2-7/8" Ice Hardened Hole Saw 49-56-0167 |
| Hardware > Tools > Drills > Mortisers > Porter Cable The Porter-Cable 43745PC is a 1-1/4 inches Hinge Mortising Cutter. It is designed for mortising of doors to accept locks, lock face plates, hinges and for general stock removal. It fits 1/4 inches - 28 threaded shanks. 43745PC |
| Hardware > Tools > Drills > > Milwaukee The Milwaukee 2238-23 M12 12-Volt Cordless Combo Kit contains the 2238-20 Clamp-Gun Clamp Meter for HVAC/R and the 2401-20 Screwdriver. The 2238 Clamp Meter features True-RMS technology for increased accuracy. This Clamp Meter is ideally-suited for testing current in professional HVAC/R commerical and industrial applications. The 2238 Clamp Meter has an ergonomic pistol grip for incredible comfort and better ease-of-use in overhead applications. The 2401 Screwdriver in the 2238-23 Combo Kit has 150 inch-pounds of torque for enough power to drive most small fasteners. The Screwdriver has a variable-speed trigger that gives you more control. Both tools in this Combo Kit are compatible with Milwaukee's M12 Lithium-Ion batteries, which allow for longer runtime and better battery efficiency. Features: 2238 Clamp Meter's large jaw size of 1.30 inches for measuring up to 750 MCM cable, thin jaw profile for accessing tight spaces Clamp Meter has wide current range to 600 amps AC/DC and wide voltage range to 1000 volts AC/DC — CAT IV 600V / CAT III 1000V for greater safety High-contrast, white-on-black display with backlight on Clamp Meter for easy reading LED floodlight and voltage detection add more value and K-type thermocouple for contact temperature measurements with Clamp Meter 2401 Screwdriver has 1/4-inch hex chuck with quick bit loading Screwdriver features a built-in LED light for increased visibility and over-mold side and grip for better control and ease-of-use What's In The Box: Milwaukee 2238-20 M12 Cordless Clamp-Gun Clamp Meter for HVAC/R Milwaukee 2401-20 M12 Cordless Screwdriver Two M12 12-Volt Lithium-Ion Batteries 30-Minute Charger Two Test Leads Dual Banana Thermocouple Contractor Bag 2238-23 |
| Hardware > Tools > Drills > > Milwaukee Milwaukee 48-89-4431 7 Piece Thunderbolt Hex Shank Drill Bit Set Includes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 48-89-4431 |
| Hardware > Tools > Drills > > Hitachi The Hitachi KC18DHL 18-Volt Cordless 3-Tool Combo Kit contains the DS18DSAL Driver Drill, WH18DSAL Impact Driver and the UB18DAL Flashlight. All three tools in the KC18DHL Combo Kit are compact and lightweight for increased ease of use and improved user comfortability. This Combo Kit is powered by Hitachi's Lithium-Ion batteries that provide steady power over the length of the charge. The batteries in the KC18DHL Combo Kit also have longer runtime compared to traditional batteries. Features: DS18DSAL Compact Pro Driver Drill with a 1/2-inch ratcheting keyless metal chuck and a 21+1 clutch with 21 torque settings and a drill mode for ultimate precision and control in both forward and reverse WH18DSAL Compact Pro Impact Driver that delivers 1,280 inch-pounds of torque for heavier applications like tightening bolts, driving lags and sinking screws UB18DAL Compact Pro Flashlight has a 5-position pivoting head so that light can be aimed as needed What's In The Box: Hitachi DS18DSAL Cordless Compact Pro 1/2-Inch Driver Drill Hitachi WH18DSAL Cordless Compact Pro Impact Driver Hitachi UB18DAL Cordless Compact Pro Flashlight Two 18-Volt 1.5Ah Lithium-Ion Batteries Quick Charger Double-Sided Phillips Driver Bit Plastic Carrying Case KC18DHL |
| Hardware > Tools > Drills > > Milwaukee The Milwaukee 2601-80R Factory Reconditioned 2601-20 18-Volt Cordless Compact Drill has a compact motor, delivering 400 inch-pounds of maximum torque. The Milwaukee 2601-20 18-Volt Cordless Compact Drill also has a heavy duty 2-speed metal gear box which is durable and lightweight. Features: 1/2-Inch, 3-jaw ratcheting chuck with plastic sleeve prevents bits from slipping Compact length, only 7-3/4-inch, fits into tight areas easily Built-in LED light illuminates work surfaces What's In The Box: Milwaukee 2601-80R M18 18-Volt Cordless Compact Drill - Tool Only Battery and Charger NOT Included 2601-80R |
